OUR COURSES

 VAT is charged extra at current rate, where applicable.

ACS - Core Domestic Gas (CCN1) and Appliances (CORE + appliances)Assessment Only – Reassessment
Length
2-3 Days
Cost
£545 (+VAT)
The ACS re-assessment is for existing gas professionals who already hold, or have held (certification expiry must not exceed 12 months to qualify for re-assessment) the ACS Core Gas Safety domestic qualification and relevant gas appliances.
View Course
ACS - Core Domestic Natural Gas Safety (CCN1) and Appliances (CORE + appliances) – Initial
Length
5 days
Cost
£680 (+VAT)
Suitable for candidates that hold a Managed Learning Programme Certificate of Competence (or equivalent) in domestic natural gas.
View Course
ACS - Core Domestic Natural Gas Safety (CCN1) and Appliances (CORE + appliances) – Reassessment
Length
3-4 days
Cost
£600.00 (+VAT)
The ACS re-assessment is for existing gas professionals who already hold, or have held (certification expiry must not exceed 12 months to qualify for re-assessment) the ACS Core Gas Safety domestic qualification and relevant gas appliances.
View Course
ACS Gas – Experienced Gas Engineers: Extend Range or Scope
Length
Duration will depend on the range/scope required
Experienced Engineers (an Engineer who is registered or previously registered on Gas Safe Register). The engineer must be in possession of or previously held an Accreditation Certification Scheme (ACS) core (or relevant qualification) for a minimum of 12 months.
View Course
ACS Gas: Appliances
Length
1 day
Cost
£65.00 (+VAT)
Suitable for existing gas professionals who already hold Core Domestic Natural Gas (CCN1) and have experience under the Supervision of a GasSafe registered engineer for the relevant appliance.
View Course
Apprenticeship: Gas Engineering (9074-03) – Advanced (L3)
Length
18 months
The Gas Engineering Apprenticeship involves the safe installation, commission, decommission and ongoing service and maintenance of domestic gas appliances.
View Course
Apprenticeship: Plumbing and Domestic Heating Technician – Advanced (L3)
Length
48 months
Plumbing and Domestic Heating Technicians plan, select, install, service, commission and maintain all aspects of plumbing and heating systems.
View Course
Diploma: in Domestic Plumbing and Heating (6035-02)
Length
9 weeks
For candidates who want to start a career in plumbing. Successful completion of the qualification will mean that candidates are at an ‘Improver/Plumber’s Mate‘ level.
View Course
Gas Engineering Operative End Point Assessment (EPA)
Length
2 days
Cost
£1250.00 + VAT
Gas Engineering End Point Assessment (EPA) knowledge test, practical assessments and worklog review.
View Course
Hot Water Systems & Safety including Unvented Hot Water (HWSS)
Length
1 day
Cost
£210.00 (+VAT)
This course is aimed at experienced plumbing and heating operatives who require a qualification in the installation, servicing and maintenance of domestic hot water systems.
View Course
Liquid Petroleum Gas (LPG) changeover including permanent dwellings (PD)
Length
1 day
Cost
£- see below
The LPG changeover (CoNGLP1) from natural Gas is for experienced Gas operatives who wish to commission, install, service and repair LPG appliances in permanent dwellings.
View Course
Managed Learning Programme (Domestic Gas Training) – Excluding realistic work environment
Length
See below
Cost
£2200.00 (+VAT)
The Managed Learning Programme is a gas training course specifically developed and designed for those wishing to enter the gas industry but do not necessarily have relevant experience or qualifications.
View Course
Managed Learning Programme (Domestic Gas Training) – Including realistic work environment
Length
See below
Cost
£2700.00 (+VAT)
The Managed Learning Programme is a gas training course specifically developed and designed for those wishing to enter the gas industry but do not necessarily have relevant experience or qualifications.
View Course
OFTEC Oil – Assessment
Length
1 day*
Cost
£260.00 (+VAT)*
The OFTEC Oil assessment is for existing OFTEC Installers who already hold the qualification (reassessment) or candidates who have completed a pre-requisite Oil training course (OFTEC50).
View Course
OFTEC Oil (OFT10-101) – Initial Package
Length
5 days
Cost
£750.00 (+VAT)
OFTEC Oil (OFT10-101) is required for any operative wishing to carry out work on domestic pressure jet appliances. It will enable installers to become OFTEC registered as domestic commercial oil firing system service technicians of pressure jet burners.
View Course
OFTEC Oil (OFT10-101) – Reassessment Package
Length
2 days
Cost
£420.00 (+VAT)
The OFTEC Oil (OFT10-101) and appliance re-assessment is for existing professionals who already hold the qualification.
View Course
Oil Training
Length
1 day*
Cost
£225.00* +VAT
Before you can join OFTEC’s competent persons register, you will need to demonstrate that your work is of the expected standard. This means you must complete a training course before undertaking any assessments.
View Course
Smart Meter Installer Core (CMA1/3) and Gas Meter Safety (MET1)
Length
3-4 days
Cost
£545.00 (+VAT)
Smart Meter Installer Core (CMA1) and Gas Meter Safety (MET1) is required for any operative wishing to either carry out emergency service gas work or gas metering work.
View Course
Water Regulations Advisory Scheme (WRAS)
Length
1 day
Cost
£190.00 (+VAT)
On completion of the course Plumbers / Engineers will have up to date knowledge of this important legislation which is used to control the installation and use of water supply systems.
View Course

A BRAND NEW CAREER IN PLUMBING & HEATING 

With purpose-built workshops and experienced tutors, Moor Training will prepare you for a long and lucrative career in plumbing and gas installation.

THE BENEFITS OF TRAINING WITH US 

  • Free & Secure parking
  • Modern, purpose-built, well equipped centre
  • Industry recognised, premium quality training
  • Express certification
  • Sociable, friendly atmosphere
  • Knowledgeable staff providing reassurance and great customer service
  • Apprenticeships with job opportunities throughout the South West 

HERE TO HELP
 

Ask one of our team
call 01837 659357